Elite Dealer

1965 Ford Mustang

Texas

$16,000

Vehicle Details

Make

Ford

Model

Mustang

Year

1965

VIN

5R07C188167

Body Type

Other

Description

1965 Ford Mustang Coupe For Sale $16,000

302 c.i. V8
5 Speed manual tranny
Runs and drives
Pony interior
Needs carburetor rebuilt or replaced
Also have these other cars and trucks for sale in collection
1967 Chevrolet Camaro RS Convertible 350 c.i. V8 - M21 4 Speed - 10 Bolt Posi-Trac - High Performance Suspension - Handles like a Corvette - Front disc brakes rear drums - PS - PB - No AC $50K
See video here
1968 Chevrolet Shortbed Pickup - Big Window - 3 Speed on column - Runs and Drives $15,000
See video here
1987 Chevrolet 4x4 Pickup - 350 c.i. V8 - Turbo 350 Automatic Tranny $10,000
See video here with 2004 Ford Crew Cab Dually also for sale
1968 Dodge Charger - Texas A&M Charger - 383 c.i. V8 - Automatic - Dark Green - $40,000 with 440 High Performance engine + $3,500
1970 Ford Mustang Mach I - 351 c.i. Cleveland V8/800 HP - 4 Speed manual -was a Road Race Car being converted back to original - Runs and Drives $35,000
See video here
1969 Plymouth Roadrunner - 383 c.i. V8 - 727 Automatic - Posi-Trac - 2 sets of seats buckets and 40/60 w/ fold down arm rest $25,000 also have extra Hemi engine for extra cost
See video here
1955 Chevrolet Bel Air 2 Door Hardtop Red - 350 c.i. V8 - Turbo 350 Automatic - was a Bel Air and now has 210 trim - Converted to Power Disc Brakes $25,000
See video here
1955 Chevrolet Bel Air 2 Door Hardtop Turquoise/White - Straight 6 cylinder - was 3 speed on column converted to floor when column shift broke - New battery - New tires - Runs and Drives - 100% original other than re-paint - underside is pretty rust free $25,000
See video here
1967 Chevrolet Chevelle Malibu in red primer- 327 c.i. V8 - Turbo 350 Automatic - Windshields metal needs replaced I have metal for front replacement $5,000 for car only $7,500 with 327 engine and Turbo 350 tranny See video here
1967 Chevrolet Camaro in primer - V8 4 Speed car - has all kinds of new parts in boxes stuffed in car - factory custom interior with opera lights - book full of records and receipts - no engine or tranny $15,000
See video here
1965 Ford Mustang Coupe Red - 302 c.i. V8 - 5 Speed manual tranny - Runs and Drives - Carburetor needs rebuilt or replaced - Pony Interior $16,000
See video here

Call or text Gary for more info at 972-935-1660 or email [email protected]
Are you ready to sell your classic car/truck or collection?
With zero upfront cost, there is no risk to you the seller.

Classic Ford Mustang Buyer's Guide

Full guide

Mike Sullivan

Muscle Cars

1964–1973

~5 min read

Updated Apr 2026

The definitive buyer's guide for classic Ford Mustang 1964½-1973. Generation breakdown, rust hotspots, engine code identification, Marti Report essentials, and current market pricing.

This guide covers

✓ 10-point inspection checklist

✓ Common issues & what to avoid

✓ In-person inspection guide

✓ Market pricing by year & condition

✓ 6 FAQs answered

✓ History & fun facts

Read the Full Mustang Buyer's Guide

Ford Mustang Market Overview

Based on 503 Ford Mustang listings currently on ClassicCarsArena.com

503

Listed Now

$38,157

Avg. Asking Price

1964–2012

Year Range

Price Position on Our Site — Below Average

This car: $16,000

Low: $3,000 High: $284,995

Transmission Distribution

Automatic 52%

Manual 33%

Condition Distribution

Excellent 10%

Good 9%

Fair 3%

Poor 0%

Data from ClassicCarsArena.com listings Browse all 503 listings →

💰

What is this car worth?

Check sold prices for the 1965 Ford Mustang

Valuation Tool →

Classic Ford Mustang Buyer's Guide

The Ford Mustang launched on April 17, 1964 and sold a million units faster than any car in American history. Sixty years later, the first-generation Mustang (1964½-1973) remains the cornerstone of the classic car hobby — the gateway car for new collectors, the trophy car for veteran enthusiasts, and the most cloned, faked, and re-stamped muscle car on the market. Whether you're hunting a base inline-six coupe or a documented Boss 429, knowing what separates the real cars from the tribute builds is the difference between an investment and a money pit.

What to Check Before Buying

✓

Verify VIN against data plate and engine casting — Fifth digit of VIN = engine code. Cross-reference with block casting number behind cylinder head.

✓

Order Marti Report for any 1967+ car over $30K — Ford's original production records via Marti Auto Works. $25 confirms what the car actually was when it left the factory.

✓

Inspect torque boxes from underneath — Front and rear, where the unibody meets floor pans. Rotted torque boxes = $3,000-$6,000 repair and chassis flex.

✓

Pull kick panels and check cowl seam — Where windshield base meets firewall. Cowl rust here drains into the cabin and rots floor pans.

✓

Magnet test rocker panels and quarters — Body filler is non-magnetic. If the magnet doesn't stick, the panel has been filled — meaning underlying rust.

✓

Check shock tower welds for cracks — Cracks radiating from upper shock mount = beaten chassis. Common on Big Block cars and 428 CJs.

✓

Verify original GT/Mach 1/Boss equipment — Without Marti docs and matching data plate, treat all performance trim claims as clone candidates.

✓

Test all electrical functions — Every gauge, every switch, every light. Brittle 60-year-old harnesses and worn switches are universal.

✓

Compression test all eight cylinders — Should read 145-175 PSI uniformly. Variance >15% between cylinders = head gasket or ring problem.

✓

Drive at least 30 minutes on highway — Listen for differential whine, transmission slip, brake pulsation, steering wander. Watch for overheating in stop-and-go traffic.

Common Issues

Mustang rust is everywhere and predictable. The torque boxes (front and rear, where the unibody meets the floor pans) are the structural killers — rotted torque boxes mean the car flexes under load and the doors won't close right. Cowl rust hides under the dashboard where the windshield base meets the firewall. Floor pans rust through from the underside in any car that lived north of the Mason-Dixon. Rear quarters, lower fenders behind the front wheels, and the trunk drop-offs are all standard rust zones. Mechanically, first-gen Mustangs are simple but the small details matter. The Toploader four-speed is bulletproof when synchronized properly; the C4 and C6 automatics are robust but commonly leak from front pump seals. The 9-inch rear is bombproof — but make sure the gear ratio matches what's claimed. Engine identification by casting numbers is essential: many cars wear the wrong block, and a 1968 GT 390 with a 1973 351W block is not what the seller is advertising. Electrical issues plague any 60-year-old car. The original wiring harnesses are brittle, the headlight switches fail, the gauges read inconsistently, and the turn signal switches die. Plan to replace the headlight switch, the ignition switch, and at least the engine-bay harness on any first-gen Mustang you buy. Budget $800-$1,500 for a complete electrical refresh.

What to Look For

Always start with the data plate (door tag) and the VIN. The fifth digit of the VIN is the engine code — A=289 4V, C=289 2V, D=289 standard, K=289 HiPo, F=302 2V, J=302 4V (Boss 302), M=351 4V, Q=428 CJ, R=428 SCJ Ram Air, S=390 4V, Z=Boss 429. Cross-reference the VIN engine code with the actual block casting number — they must agree. For any car claimed as a GT, Mach 1, Boss, Shelby, or Cobra Jet, demand a Marti Report. Marti Auto Works has Ford's original production records and can verify exactly what the car was when it left Dearborn or San Jose. A $25 Marti Report will save you $25,000 in mistakes. Cars without Marti documentation should be priced as clones, period. Unibody integrity is the other non-negotiable. Pop the hood, look at the shock towers — cracks radiating from the upper shock mount are common on Big Block cars and indicate the chassis has been beaten. Inspect the torque boxes from underneath. Lift the trunk mat and look at the trunk drop-offs. Pull the rear seat and check the floor where the seat bolts down. Fresh undercoating on a project car is a red flag — it's almost always hiding rust repairs.

Price Guide

Base 1965-1966 coupes with the inline-six or 289 2V remain the most accessible classic Mustang at $18,000-$32,000 for solid drivers. Convertibles add $8,000-$15,000 to equivalent coupe pricing. Fastbacks (1965-1968) are dramatically more valuable due to Bullitt and Eleanor pop-culture demand — a clean 1967-1968 fastback small-block runs $45,000-$75,000. 1967-1968 GT 390 cars (Bullitt-style) trade for $60,000-$110,000 with documentation. The 1968 GT 428 Cobra Jet is the holy grail of the small-bumper era at $120,000-$220,000 for documented numbers-matching cars. 1969-1970 Boss 302 and Mach 1 cars run $70,000-$140,000 depending on condition and equipment. The Boss 429 is six-figure-plus territory — $300,000-$600,000 for documented examples. 1971-1973 cars (the Big Body era) have historically been the bargain entry point but appreciation has accelerated since 2020. A clean 1973 Mach 1 with the 351 Cobra Jet now runs $45,000-$75,000 — up dramatically from the $25,000 territory of a decade ago. Project cars (running but rough) start around $15,000 for coupes and $22,000 for fastbacks.

Did You Know?

The Mustang was originally going to be called the Cougar — Lee Iacocca's team had "Cougar" emblems already produced before a focus group response prompted the last-minute name change. The Cougar name was eventually used for the Mercury sister car launched for 1967. Ford originally projected first-year Mustang sales of 100,000 units. The car sold 418,812 units in its abbreviated 18-month launch year, and over a million Mustangs were sold by March 1966 — a sales pace that has never been equaled by any other American automobile launch. The iconic 1964½ designation isn't actually a real model year — Ford built the early Mustangs as 1965 models, but the cars produced before September 1964 had different alternators, generators, and other details, leading collectors to designate them "1964½" cars to distinguish them.