Pro Dealer

1965 Plymouth Barracuda

Saskatoon, Saskatchewan

$14,160

Vehicle Details

Make

Plymouth

Model

Barracuda

Year

1965

Mileage

12,000 miles

Body Type

Fastback

Transmission

Manual

Fuel Type

Gasoline

Engine

273 ci V8

Description

Price: US $14,160 (CAD $19,990 at the dealer).

1965 Plymouth Barracuda fastback. Nice little car in stock configuration with neat looks! Driver quality repaint on this one that would still be great for cruising or any cars and coffee event. After a recent polish, paint is looking pretty good.

Chrome and bright work are in decent shape and all there! 14” rally wheels with trim rings are stock. The iconic panoramic rear window is neat and one of the styling cues that makes this car so cool! The rear seat also folds down to allow long objects between the relatively small trunk and large rear seat space. The interior is again mostly stock apart from the addition of a newer Radio/Cd player.

Hard to tell if the upholstery has ever been replaced, but it’s all in good condition. The dash does have some typical cracks in it for a car this age. Some fading in certain spots on the carpets as well, but the car is clean.

Basic stock gauges in place with the addition of an aftermarket tach on the steering column and Sunpro temp, oil pressure and voltage hanging below the dash. Basic heater and Valian AM radio. Under the hood is a Commando 273 V8 with what looks like a new 4-bbl carburetor with electric choke on top.

It’s clearly had some mechanical attention, and the engine bay is clean. Behind that is a nice little 4-speed manual transmission with floor shifter! Manual drum brakes and manual steering, but it’s quite a small car, so it’s not noticeable. The trunk has a carpet mat and original jack, with spare tire stowed below.

Nice straight forward little car with good bones and easy to cruise around in! 12,000 miles on the odometer, but with only 5 digits, true milage is unknown. We assume it’s rolled over once, making it at least 112,000.

Classic Plymouth Barracuda Buyer's Guide

Full guide

Mike Sullivan

Muscle Cars

1964–1974

~6 min read

Updated Apr 2026

Definitive buyer's guide for classic Plymouth Barracuda 1964-1974. A-body and E-body generations, fender tag and broadcast sheet authentication, Hemi and 440 Six Pack identification.

This guide covers

✓ 10-point inspection checklist

✓ Common issues & what to avoid

✓ In-person inspection guide

✓ Market pricing by year & condition

✓ 5 FAQs answered

✓ History & fun facts

Read the Full Barracuda Buyer's Guide

Plymouth Barracuda Market Overview

Based on 24 Plymouth Barracuda listings currently on ClassicCarsArena.com

Listed Now

$60,736

Avg. Asking Price

1965–1974

Year Range

Price Position on Our Site - Below Average

This car: $14,160

Low: $13,495 High: $389,999

Transmission Distribution

Automatic 63%

Manual 25% ◄

Condition Distribution

Excellent 13%

Good 4%

Fair 13%

Poor 8%

Data from ClassicCarsArena.com listings Browse all 24 listings →

💰

What is this car worth?

Check asking prices for the 1965 Plymouth Barracuda

Valuation Tool →

🔑

Selling a classic? Here's how

Fees, audience and photo limits compared: the best sites to sell a classic car .

List Yours →

Classic Plymouth Barracuda Buyer's Guide

The Plymouth Barracuda has two very different lives in classic-car history. The 1964-1969 A-body cars were affordable economy fastbacks built on the Valiant platform, fun, but not legendary. The 1970-1974 E-body cars are an entirely different animal: purpose-built muscle cars sharing platform with the Dodge Challenger, available with everything from the slant-six to the legendary 426 Hemi. Today, documented original 1970-1971 Hemi 'Cudas and AAR 'Cudas trade for seven-figure money, while solid 1973-1974 cars remain the bargain entry into Mopar muscle ownership.

What to Check Before Buying

✓

Inspect fender tag rivets and stamping style , Original 1970-1974 tags use dome-headed rivets and specific stamping fonts. Re-stamps and replacements are common fraud vectors.

✓

Locate and verify broadcast sheet , Check under rear seat, inside front seat bottom springs, behind rear seat back panel, in heater box. Demand to see it before purchase.

✓

Verify VIN engine code matches block partial VIN , 5th digit of VIN identifies engine. Block partial VIN stamped on front pad below cylinder head. Both must agree.

✓

Get Galen Govier inspection for $150K+ cars , Recognized Mopar authentication expert. $200-$500 inspection adds significant resale value and confirms originality.

✓

Inspect rear frame rails for rust and impact , Two longitudinal members from rear wheel wells to rear bumper. Common rust point and common impact damage location.

✓

Push down on each corner and watch doors , E-body unibody is light and flexes. Door movement relative to body = chassis flex damage.

✓

Magnet test rear quarters and trunk drop-offs , Body filler is non-magnetic. Driver-quality cars universally have filler, verify how much before purchase.

✓

Check rear window channel rust , On hardtop coupes, water gets trapped under the rear glass. Rust here invisible until glass is removed.

✓

Test motor mounts on big-block cars , Hemi and 440 cars break motor mounts under hard launches. Look for cracked rubber or aftermarket safety chains.

✓

Compression test all eight cylinders , Should read 145-185 PSI uniformly. Hemi cars run higher, 165-195 PSI on properly built engines.

Common Issues

Mopar E-body rust is legendary and follows predictable patterns. The lower fenders behind the front wheels, the rear quarter panels (lower and upper at the rear glass), the trunk pan, the trunk drop-offs, the rear frame rails, and the floor pans are all standard rust zones. The rear window channel on coupes traps water and rots from inside out, invisible until you remove the rear glass. Mechanically, the Mopar B and RB big-block V8s (383, 440) are bulletproof when maintained. The 426 Hemi requires specialist setup, the cross-ram intake, dual four-barrel carburetors, and solid-lifter valvetrain need attention from someone who knows the engine. The A833 four-speed and Torqueflite 727 automatic are both robust. The 8.75-inch and Dana 60 rear ends are strong; broken stub axles are uncommon except on extremely abused cars. Electrical issues vary. Original wiring harnesses are 50+ years old and prone to chafing. The voltage regulators on 1970-1972 cars commonly fail. Ammeter wiring on dashboards has caused fires in some cars, always check the back of the gauge cluster for heat damage and consider a voltmeter conversion. Vacuum-actuated systems (heater controls, headlight doors on the Cuda) commonly fail and require careful repair.

What to Look For

Fender tag and broadcast sheet are the gold-standard authentication for any Mopar E-body. The fender tag (riveted to the driver-side inner fender) is a coded plate listing all factory-installed options. The broadcast sheet (the build sheet that traveled with the car through the assembly line) is often hidden under the rear seat, in the springs of the front seat bottom, behind the back panel of the rear seat, or stuffed into the heater box. Cars with intact original fender tags and broadcast sheets carry significant premium pricing. For any 'Cuda claim (340 'Cuda, 383 'Cuda, AAR 'Cuda, 440 'Cuda, Hemi 'Cuda) the fender tag verifies the original equipment. The fifth digit of the VIN identifies the engine code: G=318, H=340, J=340 4V (AAR-spec), L=383 4V, N=383 4V (Six Barrel), U=440 4V, V=440 6V (Six Pack), R=426 Hemi 8V. Cross-reference all three (VIN, fender tag, engine block partial VIN) and demand a Galen Govier inspection for any car priced over $150,000. Body alignment is the second non-negotiable for E-body cars. The unibody is structurally weak compared to the Mustang and Camaro of the same era, heavily flexed cars show up as misaligned doors, cracked windshields, or trunk lids that don't close right. Push down on each corner of the car and watch the doors. They should not move relative to the body. For 1964-1969 A-body Barracudas, the same rust patterns apply but values are dramatically lower. The Formula S package (1965+ with the 273 V8, then 340 from 1968) is the desirable A-body trim. Verify the V code in the VIN and the original options on the dataplate.

Price Guide

The 1964-1969 A-body Barracudas remain the bargain Mopar pony car. Driver-quality 1965-1969 cars with the 273 or 340 small-block run $22,000-$45,000. Documented Formula S 340 cars (1968-1969) trade for $40,000-$75,000. 1970-1971 E-body Barracudas are the muscle-car icons. Driver-quality 318 or 340 cars run $35,000-$65,000. 'Cuda 383 cars: $55,000-$95,000. AAR 'Cuda (1970 only, T/A homologation special): $120,000-$220,000 for documented numbers-matching cars. 440 'Cuda Six Pack: $120,000-$280,000. Hemi 'Cuda: $300,000-$1.5M+ for documented numbers-matching examples. Hemi 'Cuda convertibles (only 14 produced) are $3M-$5M+ at auction. 1972-1974 cars (post-emissions de-tune, post-Hemi) are the smart-money entry into E-body ownership. Driver-quality 1973-1974 'Cuda 340 cars run $32,000-$60,000, a fraction of equivalent 1970-1971 money for nearly identical styling and a legitimate small-block performance package. Project cars (running but rough) start around $15,000 for A-body Barracudas and $25,000-$40,000 for E-body cars. Stripped E-body roller candidates without an engine or transmission can still bring $15,000-$25,000 because the demand for proper 1970-1971 'Cuda restoration projects exceeds supply.

Did You Know?

The Plymouth Barracuda technically launched on April 1, 1964, sixteen days before the Ford Mustang. Both cars were marketed as the first "pony car," but the Mustang's larger marketing budget and broader option list quickly buried the Barracuda's first-mover advantage. Plymouth never recovered the segment leadership. Only 12 Hemi 'Cuda convertibles were built for 1971, and only 14 for 1970, making them among the rarest production muscle cars ever built. A 1971 Hemi 'Cuda convertible sold at Mecum Seattle in June 2014 for $3.5 million, setting a record at the time for a production muscle car. The AAR 'Cuda was a one-year-only homologation special built to qualify the Barracuda for SCCA Trans-Am racing in 1970. Only 2,724 AAR 'Cudas were produced. The car features unique side-exit exhaust, a special 340 Six Pack engine (three two-barrel carburetors), strobe-stripe graphics, and a fiberglass hood scoop. It's now one of the most desirable post-1969 muscle cars in the entire market.