105

Listed Now

$63,405

Avg. Asking Price

1966–1996

Year Range

Transmission Distribution

Automatic 56%

Manual 30% ◄

Condition Distribution

Excellent 16%

Good 10%

Fair 2%

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

Early Bronco rust is the structural killer for any 1966-1977 Bronco that lived in salt-belt climates. The frame rusts at the body mount points and the rear cross-member; the body tub rusts at the rocker panels, the floor pans (especially the rear cargo area floor), the lower fenders behind the front wheels, the tailgate hinges, and the cowl seam where the windshield base meets the firewall. Cars described as "uncut, rust-free" with original tubs are increasingly rare and command significant premium pricing. Mechanically, the Early Bronco's engine options are simple. The 170 inline-six (1966-1969), 200 inline-six (1970-1977), 289 V8 (1966-1968), and 302 V8 (1969-1977) are all bulletproof when maintained. The Dana 30 front axle (1966-1971) and Dana 44 front axle (1972-1977) are robust; the Ford 9-inch rear axle is essentially indestructible. The Toploader 3-speed manual transmission is durable; the C4 automatic (1973+) is similarly reliable. Common issues include worn kingpins on Dana 30 axles, leaking transfer case seals, and tired carburetor settings. Big Bronco (1978-1996) issues are different. The 1978-1979 Big Broncos used the Bronco-specific frame; 1980+ Big Broncos shared the F-150 platform. Rust patterns shifted to the rear quarter panels, the cab corners (lower section behind the rear doors), the rear wheel arches, and the tailgate. Mechanically, the 351M, 400, 460, 302, 351W, and 5.8L V8 engines are all robust. Common issues include failed fuel pumps (1980-1989 cars used in-tank pumps that fail expensively), TFI ignition modules, and worn front axle u-joints. Electrical issues vary by generation. Early Broncos have brittle 50+ year-old wiring; Big Broncos have more sophisticated electrical systems prone to module failures.

Marti Auto Works build sheets are the gold-standard documentation for any 1967-and-later Bronco. The build sheet ($25 for basic, more for elite reports) confirms the original equipment of the car: engine code, transmission code, axle ratio, paint code, options, and dealer destination. For any Early Bronco priced over $30,000, the Marti Report is mandatory, too many cars on the market wear emblems and equipment that wasn't original to the car. Frame inspection is the first non-negotiable for Early Broncos. The frame rusts at the body mount points (six per side on Early Broncos) and at the rear cross-member. Lift the body off the frame with a flashlight and probe rusty areas with a screwdriver. Solid steel resists; rotten metal flakes. Frame replacement is a serious undertaking, $8,000-$18,000 for proper professional work. Tub inspection is the second non-negotiable. The Early Bronco body tub is a single welded steel structure that becomes increasingly difficult to repair properly as rust progresses. Inspect the floor pans (lift the rubber mats), the rocker panels (under the doors), the rear cargo area floor (lift the rear seat or storage compartment), the cab corners, and the tailgate hinge area. Cars described as "uncut tubs" with original sheet metal are the gold standard. Engine and drivetrain verification: cross-reference the VIN engine code (eighth digit, on 1968+ cars) with the engine block casting number. The Early Bronco 289 (1966-1968) and 302 (1969-1977) Windsor V8s have specific casting numbers that verify originality. The 170 and 200 inline-sixes are similarly identifiable. Original Dana axles have specific casting numbers and stampings that verify factory installation. Document the build sheet against the car. Cross-reference against the marque registry, the Bronco Driver registry maintains records of known-original cars and known-restored cars. The build sheet tells the real story.

Early Bronco (1966-1977) values have appreciated dramatically over the past decade. Driver-quality 1966-1969 cars (the original 'short' Bronco) run $45,000-$80,000 today. 1970-1977 cars run $35,000-$70,000 in driver condition. Documented original-paint, low-mileage examples can reach $95,000-$150,000+. Documented uncut original tubs in survivor condition are the ultimate Early Bronco, these cars trade for $80,000-$220,000 depending on year, condition, and equipment. The 1966 launch year cars are the most desirable, with documented original 1966 cars approaching $200,000+ when fully verified. LS-swapped restomod Early Broncos (with modern drivetrains, modern brakes, modern interior) run $80,000-$220,000 depending on quality of build. Frame-up restomod builds from recognized specialists (Gateway, Velocity, Maxlider, Icon) run $200,000-$500,000+. Big Bronco (1978-1996) pricing is dramatically more affordable. Driver-quality 1978-1979 cars run $22,000-$42,000. 1980-1989 cars run $15,000-$32,000. 1990-1996 cars run $12,000-$28,000. The 1990s OJ Simpson-era white Broncos have appreciated due to pop-culture interest, clean white 1990-1996 Broncos run $22,000-$45,000. Project Early Broncos (running but rough) start around $15,000-$28,000. Stripped roller candidates can be had for $8,000-$20,000, but rust restoration on a Bronco typically runs $30,000-$70,000 in body and frame work alone before paint.

The 1966 Ford Bronco was developed under chief engineer Paul Axelrad as a direct response to the original Jeep CJ. Ford Product Planning identified an unmet market for a compact, capable, on-road-and-off-road vehicle that would appeal to suburban families as well as serious off-roaders. The original concept was approved by Lee Iacocca (then Vice President of Ford Motor Company) in 1963, and the car launched in August 1965 as a 1966 model. Only 4,090 Roadster variants (Bronco model U13) were built in 1966, making them among the rarest Early Bronco variants. The U13 Roadster had no roof and no doors. The Half-Cab Pickup was a separate body style (model U14) with a fixed forward roof and open rear cargo bed. Documented Roadster examples in survivor condition trade for $80,000-$150,000+ today. The Bronco was discontinued in 1996 after 30 years of continuous production, replaced by the four-door Ford Expedition for the 1997 model year. Ford reintroduced the Bronco nameplate for the 2021 model year on an entirely new platform, but the 1966-1996 classic Broncos remain a separate market segment with no direct connection to the new vehicles. I've spent two decades chronicling Ford's SUV history, and the original Bronco's combination of compact dimensions, rugged engineering, and timeless styling explain why these cars have become the fastest-appreciating American collector vehicles of the past decade.