87

Listed Now

$23,527

Avg. Asking Price

1947–1997

Year Range

Transmission Distribution

Automatic 44%

Manual 38% ◄

Condition Distribution

Excellent 14%

Good 22%

Fair 6%

Poor 3%

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

F100 rust patterns vary by generation but follow predictable patterns. The cab corners (lower section behind the doors), the rocker panels, the floor pans, the cab mount points to the frame, the lower fenders, and the bed floor are all standard rust zones across all generations. The frame rusts at the rear cross-member, at the body mount points, and inside boxed frame sections, water gets in but doesn't drain out, rotting from inside. 1953-1956 first-generation cars (the iconic Effie) have specific rust concerns at the running board mounts, the fender attachment points, and the cab-to-bed gap. 1961-1966 third-generation cars (the unibody trucks of 1961-1963, then the conventional cab/bed of 1964-1966) have unique structural issues, unibody trucks rot the bed-to-cab seam from inside. 1967-1979 "bumpside" and "dentside" cars are the most popular F100 era for restomod builds and have the strongest parts support. Common issues include burnt valves on cars run with poor ignition timing, leaky timing covers, worn front kingpins (heavy-duty axle option), and tired Holley or Autolite carburetors. The Ford 9-inch rear axle is essentially indestructible; the C4 and C6 automatics are similarly bulletproof. Mechanically, the F100 used a wide range of engines. Inline-six options (215, 223, 240, 300) are bulletproof and underpowered. The Y-block 239/256/272 V8 (1953-1962) is robust. The FE-series 352, 360, 390 V8 (1958-1976) is the most common F100 V8 and the most desirable. The 351 Windsor and 351 Cleveland V8s (1969-1979) are similarly robust.

Frame inspection is the first non-negotiable on any F100. Crawl under the truck with a flashlight. Probe the perimeter frame at the rear cross-member, the cab mount points, and the front horns. Solid steel resists; rotten metal flakes. Frame replacement on an F100 is $8,000-$18,000 for proper professional work, verify the frame is solid before considering any cosmetic or mechanical concerns. The frame and the cab are non-negotiable. Cab corner rust is universal on driver-quality F100s, verify how much before purchase. Cab corners are reproduction parts available for $200-$500 per pair, but installation requires skilled bodywork and proper rust removal. A truck with bondo over rotten cab corners is a 5-year time bomb. Bed inspection is the second non-negotiable for any pickup truck. Lift the bed mat or any bed liner installed and inspect the bed floor with strong light. The bed floor on an F100 is a stamped steel pan that rusts from above (cargo wear) and below (water intrusion). Rust through is universal on cars used as actual working trucks; cars used as cruisers tend to have better-preserved beds. For 1967-1979 cars, the cowl seam where the windshield base meets the firewall is a critical rust point. Water collects there and rots downward into the cab and forward into the firewall. Pull the dashboard pad and inspect the cowl from inside the cab if practical. Cowl rust is one of the more expensive F100 repairs, $2,500-$5,500 for proper professional work. Engine verification by casting numbers is essential. The Y-block (1953-1962), FE-series (1958-1976), and 351 W/C (1969-1979) all have specific casting numbers. Cross-reference the VIN engine code (5th digit on 1968+ cars) with the actual block casting number. Replacement engines are common, original numbers add value but aren't critical for driver-quality cars.

1953-1956 first-generation F100s (the "Effie") are the most desirable era. Driver-quality cars run $28,000-$48,000 today. Restomod 1953-1956 trucks (with modern drivetrains and brakes): $45,000-$95,000. Documented original-paint, low-mileage cars: $55,000-$95,000. 1957-1960 second-generation cars: driver-quality cars run $22,000-$42,000. The 1957 model (the launch of the modern style) is the most desirable year of this generation. 1961-1966 third-generation cars (unibody 1961-1963, conventional 1964-1966): driver-quality cars run $18,000-$35,000. Unibody trucks are increasingly collected for their unusual configuration but rust concerns limit value. 1967-1972 "bumpside" F100s are the breakout segment of the past five years. Driver-quality cars run $22,000-$42,000, with restomod builds reaching $55,000-$95,000+. The 1967-1968 cars with the small bumper are the most desirable years. 1973-1979 "dentside" F100s have appreciated dramatically since 2018. Driver-quality cars run $18,000-$35,000, with restomod builds at $45,000-$85,000. The 1976-1979 cars are particularly popular for cosmetic restomod builds. 1980-1983 final-generation F100s remain the bargain entry: $12,000-$25,000 for driver-quality cars. The 1980 redesign brought the modern bigger F-Series styling. Project F100s start around $8,000-$18,000 across most generations. Stripped roller candidates: $3,500-$8,000. Either buy a finished truck or buy a clean rust-free truck and build it yourself.

The F100 designation began in 1953 with the redesigned F-Series replacing the original 1948-1952 F-1 nameplate. Ford's product planners chose the "F100" to indicate the half-ton (1/2-ton) payload class within the new F-Series numbering scheme: F100 (half-ton), F250 (three-quarter-ton), F350 (one-ton). The naming convention has remained essentially unchanged through Ford's modern F-Series production. The 1961-1963 unibody F100 was a bold experiment: Ford built the cab and bed as a single welded unibody structure rather than as separate components. The configuration improved aerodynamics and reduced manufacturing costs but proved problematic for working trucks (frame flex caused bed-side dimensional issues), and Ford reverted to conventional cab/bed construction for 1964. Documented unibody F100s are now collected for their unusual configuration and short production run. The "bumpside" and "dentside" nicknames for the 1967-1972 and 1973-1979 F100 generations didn't exist when the trucks were new, they're enthusiast-coined terms adopted in the 2000s when these generations entered the collector market. Bumpside refers to the raised crease running the length of the bedside that gives the truck its name; dentside refers to the indented or "dented" lower bedside crease that distinguishes the 1973-1979 generation.