SOLD on Jun 15, 2026

Elite Dealer

1969 Ford F-250

Michigan

$32,995 $35,495

Vehicle Details

Make

Ford

Model

F-250

Year

1969

Mileage

47,500 miles

Exterior Color

Other

Transmission

Automatic

Drivetrain

RWD

Fuel Type

Gasoline

Engine

starts easily

Condition

Excellent

Description

1969 Ford F-250 | 47K Original Miles | Documented Restoration | Show-Ready, Daily-Drive Capable This beautifully restored 1969 Ford F-250 is a rare combination of originality, craftsmanship, and usability. Showing just 47,000 original miles with a clear title, this truck has been meticulously brought back to life with a focus on retaining its classic character while updating mechanical systems for reliable performance. Whether you’re after a show-worthy weekend cruiser or a solid vintage driver, this F-250 delivers on all fronts.

Highlights: 47,000 documented original miles Complete frame-on restoration with extensive documentation including 8x10 photos of the truck before and during restoration Stripped down completely including bed removal and thorough sanding done by hand – every inch of the body is known inside and out Ford-era correct paint color from 1969–70 Mach 1 Mustang (appears darker in person); always turns heads and draws compliments at shows Rust-free frame and floor pans, new crossmembers, and fresh wood bed floor No accident history Body & Exterior: New front bumper New windshield with rubber seals (front and rear) Doors, glass, and interior components removed for professional repaint New emblems, inner and outer door handles Side window seals and brushings replaced – windows roll down smoothly Straight body, excellent panel fitment, and clean lines throughout Interior: Original seat reupholstered using matched vinyl to factory spec; center section retains original material New dashboard, professionally installed Interior fully redone, clean and classic with no cut dash Aftermarket radio installed (dash uncut) All gauges, heater, and wipers work as they should Mechanical: Original engine starts easily, runs strong New carburetor (original included in sale) Electronic ignition upgrade for better reliability Transmission shifts properly – tested up to 65 mph with no issues New exhaust manifold gaskets/bolts, fresh mufflers, original pipes intact New brake booster, master cylinder, and steel brake lines Power-assisted steering with cooler – smooth and responsive New steering hoses, front bushings, heavy-duty shocks, and cab bushings New radial tires with matching spare – includes 4 brand new bolt-on center caps Additional Notes: Emergency brake currently not working Clean title in hand Always stored and maintained with care Frequently taken to car shows and driven, not just parked This truck is as honest and solid as they come, with thoughtful restoration work and tasteful enhancements that preserve its vintage integrity. Whether you're a collector, enthusiast, or someone who simply loves classic American trucks, this F-250 is turn-key and ready to impress. Please Note The Following **Vehicle Location is at our clients home and Not In Cadillac, Michigan. **We do have a showroom with about 25 cars that is by appointment only **Please Call First and talk to one of our reps at 231-468-2809 EXT 1 **

Classic Ford F-250 Buyer's Guide

Full guide

Robert Halloran

Classic Trucks

1953–1986

~5 min read

Updated Apr 2026

Definitive buyer's guide for classic Ford F250 1953-1986. Heavy-duty drivetrain inspection, frame and cab rust hotspots, FE and 351 V8 identification, current market pricing for survivors and restomods.

This guide covers

✓ 10-point inspection checklist

✓ Common issues & what to avoid

✓ In-person inspection guide

✓ Market pricing by year & condition

✓ 5 FAQs answered

✓ History & fun facts

Read the Full F-250 Buyer's Guide

Ford F-250 Market Overview

Based on 30 Ford F-250 listings currently on ClassicCarsArena.com

Listed Now

$23,556

Avg. Asking Price

1961–1999

Year Range

Price Position on Our Site — Average Range

This car: $32,995

Low: $6,195 High: $80,000

Transmission Distribution

Automatic 43% ◄

Manual 33%

Condition Distribution

Excellent 13% ◄

Good 23%

Fair 17%

Poor 7%

Data from ClassicCarsArena.com listings Browse all 30 listings →

Classic Ford F-250 Buyer's Guide

The Ford F250 is the three-quarter-ton heavyweight of Ford's F-Series pickup line, sharing platform with the F100 and F150 across thirty-plus years of production but with significantly heavier-duty mechanicals built to actually work. From the 1953-1956 first-generation F250s with their reinforced frames and beefier rear axles, through the bumpside era (1967-1972), dentside era (1973-1979), and 1980-1986 final-generation cars, the F250 represents the working-truck end of the classic Ford pickup market. These trucks did real labor for real owners, and the surviving examples that haven't been worked to death command genuine respect — and increasingly genuine money. Don't buy somebody else's project — the frame, the cab, and the rear axle are all non-negotiable. Either buy a finished truck or buy a clean rust-free truck and build it yourself.

What to Check Before Buying

✓

Inspect frame at rear cross-member and cab mounts — Heavier-gauge steel than F100. Internal corrosion harder to detect. Frame replacement = $10,000-$22,000.

✓

Verify Highboy 4WD transfer case mounting — Divorced-style mount (transfer case behind transmission) defines Highboy. Lowboy conversions reduce value.

✓

Test Dana 60/70 rear axle for whine — Should rotate smoothly. Differential whine on deceleration = $1,500-$2,800 to repair.

✓

Verify rear axle ratio against original spec — 4.10 ratio for working duty; 3.55 for highway cruising. Casting numbers identify original.

✓

Examine cab corners and rocker panels — Cab corner rust universal on driver-quality F250s. Repair requires skilled bodywork.

✓

Lift bed mat and inspect bed floor — Three-quarter-ton trucks saw heavier loads than F100s. Bed floor rust often more advanced.

✓

For 6.9L diesel, demand maintenance records — IDI diesel durable when serviced; expensive when neglected. Verify oil, fuel filter, injector pump history.

✓

Check 4WD engagement on test drive — Should engage cleanly without binding. Worn front axle u-joints cost real money to repair.

✓

Inspect leaf springs for sag — Decades of cargo loading sags springs. Replacement = $600-$1,200 per pair.

✓

Cross-reference VIN engine code with block casting — 5th digit of VIN (1968+) = engine code. 360/390 FE, 460, 6.9L diesel each have specific casting numbers.

Common Issues

F250 rust patterns mirror F100 patterns but the working-truck duty cycle accelerates wear and damage. Cab corners, rocker panels, floor pans, cab mount points, lower fenders, and bed floor are universal rust zones. The frame on F250 is heavier-gauge steel than F100, which actually makes frame rust slower to perforate but harder to detect — solid-feeling frames can have significant internal corrosion in boxed sections. The heavy-duty rear axle (Dana 60 most common, Dana 70 on some configurations) is bulletproof but the wheel bearings and seals require periodic replacement. Worn front kingpins (with the heavy-duty axle option) cause steering wander and require $800-$1,500 in proper repair. Heavy-duty leaf springs sag over decades of cargo loading — replacement is $600-$1,200 per pair. Mechanically, F250s used the same engine families as F100s but with heavier-duty cooling and accessory packages. The FE-series 360, 390, and 460 V8s are most common in 1968-1979 trucks. The 6.9L IDI diesel (Navistar/International-built, 1983-1986) became available in the final-generation cars and represents a unique chapter in F250 ownership — diesel-equipped trucks command 15-25% premium over gas-engine equivalents in the current market. The C6 automatic and the 4-speed manual transmissions used in F250s are essentially indestructible. Common issues include leaky transmission seals on neglected trucks, worn front pump seals, and tired carburetor settings on gas engines. The 460 big-block is thirsty (8-12 mpg typical) but powerful and durable — proper rebuild is $5,500-$9,500 in parts and labor.

What to Look For

Frame inspection is the first non-negotiable on any F250. The frame is heavier-gauge steel than F100 frames, which means surface rust is less concerning but internal corrosion in boxed sections is harder to detect. Probe with a screwdriver at the rear cross-member, cab mount points, front horns, and inside boxed sections (where you can reach them). Solid steel resists; rotten metal flakes. Frame replacement on a heavy-duty F250 is $10,000-$22,000 for proper professional work. The frame, the cab, and the rear axle are non-negotiable on an F250. The Dana 60 (or Dana 70) rear axle should rotate smoothly without grinding or whining when the truck is driven on the highway. Differential whine on deceleration indicates worn pinion bearings — $1,500-$2,800 to repair properly. Verify the rear axle ratio against original specifications — F250s with the 4.10 ratio are more desirable for working duty, while the 3.55 ratio is preferred for highway cruising. Cab inspection is the second non-negotiable. Cab corner rust, rocker panel rust, and floor pan rust are universal on driver-quality F250s. Pull the floor mats and inspect floor pans. Look at the cab corners from outside and from inside through the kick panels. The cab mount points to the frame commonly rust through — replacement requires lifting the cab off the frame, which is a serious undertaking. Bed inspection is the third non-negotiable. F250 beds saw harder service than F100 beds — the three-quarter-ton payload capacity meant the trucks were used for heavier loads. Lift the bed mat and inspect the bed floor with strong light. Rust through is universal on cars used as actual working trucks; cars used as cruisers tend to have better-preserved beds. For 1983-1986 6.9L diesel-equipped F250s, demand evidence of regular maintenance. The 6.9L IDI is durable when serviced correctly but expensive to repair when neglected. Verify oil change history, fuel filter replacement, and injector pump service. Proper diesel maintenance budget on these trucks is $2,500-$5,000 annually.

Price Guide

1953-1956 first-generation F250s: driver-quality cars run $25,000-$45,000 today. The 1956 model is the most desirable. Restomod first-generation F250s: $45,000-$85,000+. Documented original cars: $45,000-$80,000. 1957-1960 second-generation cars: driver-quality cars run $22,000-$38,000. The second-generation F250s are dramatically cheaper than equivalent F100s of the same era and represent good value for buyers who don't need a half-ton's lighter handling. 1961-1966 third-generation F250s: driver-quality cars run $18,000-$32,000. The 1961-1963 unibody configuration was actually more common on F250s than F100s due to commercial-vehicle demand. Conventional cab/bed 1964-1966 F250s are the more practical choice for collector ownership. 1967-1972 bumpside F250s have appreciated dramatically since 2018. Driver-quality cars run $22,000-$40,000, with restomod builds at $50,000-$85,000. Highboy 4WD F250s (1967-1977) command 25-40% premium over equivalent 2WD trucks due to off-road desirability. 1973-1979 dentside F250s: driver-quality cars run $18,000-$32,000. The 1973-1977 highboy 4WD F250 is the most desirable variant of this era. The 1978-1979 cars represent the smart-money entry into dentside F250 ownership. 1980-1986 final-generation F250s: driver-quality cars run $15,000-$28,000 for gas-engine examples. 6.9L diesel-equipped 1983-1986 F250s command 15-25% premium — $22,000-$40,000 for documented diesel trucks. Project F250s start around $8,000-$18,000 across most generations. Stripped roller candidates: $3,500-$8,000.

Did You Know?

The F250 designation began with the 1953 F-Series redesign as the three-quarter-ton model in Ford's payload-class numbering scheme. Ford's product planners chose the round numbers (F100, F250, F350) over the alphabetical predecessors (F-1, F-2, F-3) to provide clearer payload-class identification for fleet buyers. The naming convention has remained essentially unchanged through Ford's modern Super Duty production. The iconic 4WD Highboy F250 was Ford's response to growing off-road demand in the late 1960s and 1970s. Highboy F250s (1967-1977) feature an unusually high 4WD ride height due to the divorced-style transfer case mounting, which positioned the transfer case behind the transmission rather than directly attached. The configuration provided exceptional ground clearance but required modifications to the bed and fender heights. Documented Highboy F250s now command 25-40% premium over equivalent 2WD trucks. The 6.9L IDI diesel introduced in 1983 was actually built by Navistar International for Ford and represented the first widely-available diesel option in the F-Series. The 6.9L's combination of working-truck reliability and acceptable fuel economy (15-19 mpg typical) made it the preferred F250 engine for commercial buyers, and surviving 6.9L F250s in good condition are now genuinely sought-after by collectors and restorers.