31

Listed Now

$20,709

Avg. Asking Price

1960–1999

Year Range

Transmission Distribution

Automatic 52%

Manual 32% ◄

Condition Distribution

Excellent 16%

Good 19%

Fair 16%

Poor 3%

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

F250 rust patterns mirror F100 patterns but the working-truck duty cycle accelerates wear and damage. Cab corners, rocker panels, floor pans, cab mount points, lower fenders, and bed floor are universal rust zones. The frame on F250 is heavier-gauge steel than F100, which actually makes frame rust slower to perforate but harder to detect, solid-feeling frames can have significant internal corrosion in boxed sections. The heavy-duty rear axle (Dana 60 most common, Dana 70 on some configurations) is bulletproof but the wheel bearings and seals require periodic replacement. Worn front kingpins (with the heavy-duty axle option) cause steering wander and require $800-$1,500 in proper repair. Heavy-duty leaf springs sag over decades of cargo loading, replacement is $600-$1,200 per pair. Mechanically, F250s used the same engine families as F100s but with heavier-duty cooling and accessory packages. The FE-series 360, 390, and 460 V8s are most common in 1968-1979 trucks. The 6.9L IDI diesel (Navistar/International-built, 1983-1986) became available in the final-generation cars and represents a unique chapter in F250 ownership, diesel-equipped trucks command 15-25% premium over gas-engine equivalents in the current market. The C6 automatic and the 4-speed manual transmissions used in F250s are essentially indestructible. Common issues include leaky transmission seals on neglected trucks, worn front pump seals, and tired carburetor settings on gas engines. The 460 big-block is thirsty (8-12 mpg typical) but powerful and durable, proper rebuild is $5,500-$9,500 in parts and labor.

Frame inspection is the first non-negotiable on any F250. The frame is heavier-gauge steel than F100 frames, which means surface rust is less concerning but internal corrosion in boxed sections is harder to detect. Probe with a screwdriver at the rear cross-member, cab mount points, front horns, and inside boxed sections (where you can reach them). Solid steel resists; rotten metal flakes. Frame replacement on a heavy-duty F250 is $10,000-$22,000 for proper professional work. The frame, the cab, and the rear axle are non-negotiable on an F250. The Dana 60 (or Dana 70) rear axle should rotate smoothly without grinding or whining when the truck is driven on the highway. Differential whine on deceleration indicates worn pinion bearings, $1,500-$2,800 to repair properly. Verify the rear axle ratio against original specifications: F250s with the 4.10 ratio are more desirable for working duty, while the 3.55 ratio is preferred for highway cruising. Cab inspection is the second non-negotiable. Cab corner rust, rocker panel rust, and floor pan rust are universal on driver-quality F250s. Pull the floor mats and inspect floor pans. Look at the cab corners from outside and from inside through the kick panels. The cab mount points to the frame commonly rust through, replacement requires lifting the cab off the frame, which is a serious undertaking. Bed inspection is the third non-negotiable. F250 beds saw harder service than F100 beds, the three-quarter-ton payload capacity meant the trucks were used for heavier loads. Lift the bed mat and inspect the bed floor with strong light. Rust through is universal on cars used as actual working trucks; cars used as cruisers tend to have better-preserved beds. For 1983-1986 6.9L diesel-equipped F250s, demand evidence of regular maintenance. The 6.9L IDI is durable when serviced correctly but expensive to repair when neglected. Verify oil change history, fuel filter replacement, and injector pump service. Proper diesel maintenance budget on these trucks is $2,500-$5,000 annually.

1953-1956 first-generation F250s: driver-quality cars run $25,000-$45,000 today. The 1956 model is the most desirable. Restomod first-generation F250s: $45,000-$85,000+. Documented original cars: $45,000-$80,000. 1957-1960 second-generation cars: driver-quality cars run $22,000-$38,000. The second-generation F250s are dramatically cheaper than equivalent F100s of the same era and represent good value for buyers who don't need a half-ton's lighter handling. 1961-1966 third-generation F250s: driver-quality cars run $18,000-$32,000. The 1961-1963 unibody configuration was actually more common on F250s than F100s due to commercial-vehicle demand. Conventional cab/bed 1964-1966 F250s are the more practical choice for collector ownership. 1967-1972 bumpside F250s have appreciated dramatically since 2018. Driver-quality cars run $22,000-$40,000, with restomod builds at $50,000-$85,000. Highboy 4WD F250s (1967-1977) command 25-40% premium over equivalent 2WD trucks due to off-road desirability. 1973-1979 dentside F250s: driver-quality cars run $18,000-$32,000. The 1973-1977 highboy 4WD F250 is the most desirable variant of this era. The 1978-1979 cars represent the smart-money entry into dentside F250 ownership. 1980-1986 final-generation F250s: driver-quality cars run $15,000-$28,000 for gas-engine examples. 6.9L diesel-equipped 1983-1986 F250s command 15-25% premium, $22,000-$40,000 for documented diesel trucks. Project F250s start around $8,000-$18,000 across most generations. Stripped roller candidates: $3,500-$8,000.

The F250 designation began with the 1953 F-Series redesign as the three-quarter-ton model in Ford's payload-class numbering scheme. Ford's product planners chose the round numbers (F100, F250, F350) over the alphabetical predecessors (F-1, F-2, F-3) to provide clearer payload-class identification for fleet buyers. The naming convention has remained essentially unchanged through Ford's modern Super Duty production. The iconic 4WD Highboy F250 was Ford's response to growing off-road demand in the late 1960s and 1970s. Highboy F250s (1967-1977) feature an unusually high 4WD ride height due to the divorced-style transfer case mounting, which positioned the transfer case behind the transmission rather than directly attached. The configuration provided exceptional ground clearance but required modifications to the bed and fender heights. Documented Highboy F250s now command 25-40% premium over equivalent 2WD trucks. The 6.9L IDI diesel introduced in 1983 was actually built by Navistar International for Ford and represented the first widely-available diesel option in the F-Series. The 6.9L's combination of working-truck reliability and acceptable fuel economy (15-19 mpg typical) made it the preferred F250 engine for commercial buyers, and surviving 6.9L F250s in good condition are now genuinely sought-after by collectors and restorers.