Elite Dealer

1929 Ford Model A

$39,995

Vehicle Details

Make

Ford

Model

Model A

Year

1929

Mileage

500 miles

VIN

554T33

Body Type

Pickup Truck

Transmission

Automatic

Fuel Type

Gasoline

Engine

350

Description

1929 Ford Roadster Pickup Hot Rod For Sale
350 V8 * TH350 Automatic * TCI Chassis * Only 500 Miles on Build
This 1929 Ford Roadster Pickup is a beautifully executed hot rod packed with thoughtful details everywhere you look. Combining traditional hot-rod styling with a 350ci Chevrolet V8, TH350 automatic, custom TCI chassis, Ford rear end, rack-and-pinion steering, four- wheel performance upgrades, and a beautifully finished custom interior, this is a lightweight roadster pickup built to be driven and enjoyed. With only approximately 500 miles since completion, the build remains exceptionally fresh and presents beautifully from the body and interior right down to its highly detailed undercarriage.

The truck uses a fiberglass roadster body paired with a steel pickup bed, all sitting on a purpose-built TCI chassis. The frame and suspension are beautifully finished, and the stance is dialed in with classic Halibrand-style wheels, wide rear rubber, and a traditional hot-rod chopped rake. Under the lift-off hood is a 350ci Chevrolet small-block V8 backed by a TH350 3-speed automatic transmission.

The engine features an Edelbrock four-barrel carburetor, finned aluminum valve covers, electronic ignition, shorty headers, heat shielding around the plug wires, and numerous polished and chrome details. A custom aluminum radiator with electric cooling fan keeps the small-block cool, while a full stainless-steel exhaust system with Flowmaster mufflers gives the truck a deep, traditional hot-rod sound without taking away from its drivability. Power is sent to a Ford 8-inch rear end, while the chassis incorporates adjustable rear coilovers and a ladder-bar setup.

Powertrain & Chassis:
* 350ci Chevrolet small-block V8
* TH350 3-speed automatic transmission
* Ford 8-inch rear end
* Edelbrock four-barrel carburetor
* Electronic ignition
* Shorty headers
* Stainless-steel exhaust
* Finned aluminum valve covers
* Custom aluminum radiator
* Electric cooling fan
* Powder Coated TCI custom chassis
* Rack-and-pinion steering
* Adjustable coilovers
* Ladder-bar rear suspension
* Front disc brakes
* Approximately 500 miles on the build
One of the standout elements is the custom oak-finished pickup bed. The natural oak wood adds warmth and craftsmanship to the otherwise performance-oriented build and provides a great contrast against the stunning black paint and polished mechanical components. The rear steel bed incorporates cleverly designed storage compartments, nestled in 2 wine barrel-style storage and an additional concealed area intended for keeping paperwork and other small items protected.

The battery is neatly housed within the rear storage area along with a cutoff switch, and an Optima gel battery is installed. The 2nd half of the wine barrel is the fuel tank with a chrome flush mount cap
The steel bed also incorporates beautifully finished hardware and extensive custom detailing. It's the kind of build where the more time you spend looking, the more small touches you discover.

The roadster body has been chopped approximately four inches, including the windshield, giving the truck its low, aggressive profile. The windshield also tilts for additional open-air character. A top frame is included with the truck and is ready to be fitted with the owner's choice of canvas material.

Exterior & Custom Details:
* Fiberglass roadster body
* Steel pickup bed
* Approximately 4-inch chopped body/windshield profile
* Tilting windshield
* Lift-off hood
* Custom oak bed treatment
* Halibrand-style wheels
* Wide General rear tires
* Integrated LED lighting
* LED taillights
* LED headlights
* Turn signals integrated into the headlights
* Extensive polished and chrome detailing
* Custom rear storage compartments
* Optima battery
* Battery cutoff switch
* Top frame included
* Car cover included
The interior is equally impressive. Beautiful HD Vinyl upholstery covers the seating, while both seats are power-operated and heated-an unusual level of comfort in a traditional roadster pickup. A three-spoke wood steering wheel adds the right vintage touch, complemented by classic- style AutoMeter gauges mounted in a billet bezel.

A Lokar shifter and Lokar pedal assembly continue the quality theme, while seat belts provide an additional measure of security. Even the shifter boot and smaller trim pieces have been carefully finished to complement the rest of the build. Interior:
* Custom HD Vinyl upholstery
* Integrated gas tank in 2nd wine barrel
* Heated seats
* Seat belts
* Three-spoke wood steering wheel
* AutoMeter gauges
* Billet gauge bezel
* Lokar automatic shifter
* Lokar pedal assembly
* Custom leather shifter boot
* Detailed interior trim
The underside deserves just as much attention as the top.

The chassis, suspension, exhaust, and hardware have all been carefully finished rather than treated as an afterthought. Adjustable coilovers, the ladder-bar rear setup, polished components, and stainless exhaust make the undercarriage nearly as impressive as the exterior. On the road, the truck is surprisingly comfortable for such a compact, lightweight hot rod.

The 350 V8 starts easily, runs smoothly, and sounds fantastic, while the automatic transmission, rack-and-pinion steering, and well-sorted suspension make it an approachable cruiser rather than a car that's only enjoyable sitting at a show. With its TCI chassis, 350/TH350 drivetrain, custom suspension, oak bed, heated power seats, LED lighting, stainless exhaust, and approximately 500 miles since completion, this 1929 Ford is a distinctive hot rod with craftsmanship evident throughout. It's a truck built around the details-and the closer you look, the more there is to appreciate, you won't see another one like it amongst the common muscle cars!
For Sale By Owner Located In Massapequa, NY 11758
Take A L@@K At The Video On YouTube:
Follow This Link To Almost 200 High Resolution Photos: rbxs5

Trim: Hot Rod Convertible Pickup For Sale
Options: Premium Sound System, Vinyl Interior Surface

Classic Ford Model A Buyer's Guide

Full guide

Sarah Whitfield

Pre-War Classics

1928–1931

~5 min read

Updated Apr 2026

Definitive buyer's guide for Ford Model A 1928-1931. Body style verification, four-cylinder engine inspection, mechanical brake adjustment, MAFCA Authority verification, current market pricing.

This guide covers

✓ 10-point inspection checklist

✓ Common issues & what to avoid

✓ In-person inspection guide

✓ Market pricing by year & condition

✓ 5 FAQs answered

✓ History & fun facts

Read the Full Model A Buyer's Guide

Ford Model A Market Overview

Based on 222 Ford Model A listings currently on ClassicCarsArena.com

222

Listed Now

$31,934

Avg. Asking Price

1923–1990

Year Range

Price Position on Our Site — Average Range

This car: $39,995

Low: $5,995 High: $87,495

Transmission Distribution

Automatic 33% ◄

Manual 38%

Condition Distribution

Excellent 12%

Good 9%

Fair 3%

Data from ClassicCarsArena.com listings Browse all 222 listings →

💰

What is this car worth?

Check sold prices for the 1929 Ford Model A

Valuation Tool →

Classic Ford Model A Buyer's Guide

The Ford Model A was produced from October 1927 through March 1932 and represents the foundation of the pre-war American collector car hobby. Replacing the Model T after eighteen years of production, the Model A introduced standardized hand controls, a sliding-gear transmission, four-wheel mechanical brakes, and the styling vocabulary that defined American motoring through the 1930s. Approximately 4.85 million Model As were produced across all body styles, and a remarkable percentage of them survive today — supported by perhaps the most active marque club in the world (Model A Restorers Club, MAFCA, and the Model A Ford Club of America). For new buyers, the Model A represents the most accessible genuine pre-war American collector car, with strong parts support, an active community, and pricing that has remained remarkably stable for decades.

What to Check Before Buying

✓

Cross-reference against MAFCA Authentic Specifications — Model A Ford Club of America volume documents factory-correct specifications. Mandatory reference for any purchase.

✓

Verify body style code on firewall data plate — Over 30 body styles produced. Specialty styles (Town Car, Victoria) command significant premium pricing when documented.

✓

Verify engine number against production records — Stamped on top of block, driver side, behind cylinder head. Replacement engines reduce value 10-20%.

✓

Probe wood inner body framing — Door pillars, windshield post, rear body corners. Wood rot = $5,000-$15,000 specialist coachbuilding repair.

✓

Inspect lower body panels and running boards — Universal rust zones. Behind rear wheels, below doors, fender attachment points.

✓

Test mechanical brake adjustment — Stop at 20 mph. Pull should be straight without grabbing or fading. Brake failure is most common Model A accident cause.

✓

Compression test all four cylinders — Should read 60-75 PSI uniformly. Pre-war engines run lower compression than overhead-valve engines.

✓

Verify three-speed transmission operation — Sliding-gear transmission requires double-clutching. Verify smooth shifts and no synchro grinding.

✓

Test 6V positive-ground electrical or verify conversion — Original 6V positive-ground; many cars converted to 12V negative-ground. Verify conversion done properly.

✓

Inspect cowl seam for water damage — Where windshield base meets firewall. Water damage here rots wood structure and steel cowl.

Common Issues

Model A rust patterns are predictable across all body styles. Lower body panels (especially behind the rear wheels and below the doors), running boards, fender attachment points, the rear cargo floor on roadsters and pickups, and the cowl seam where the windshield base meets the firewall are universal rust zones. The wood structure inside Model A bodies (most have wood inner framing supporting the steel outer panels) rots when water penetrates through failed weatherseals — repair requires specialist coachbuilding skill. Mechanically, the 200.5 cubic inch L-head four-cylinder is among the most over-engineered engines of the pre-war era — bulletproof when serviced correctly. Common issues include burnt valves on cars run with poor ignition timing, worn camshaft lobes (camshaft replacement is a significant job), oil leaks at the rear main seal (Model As had no rear main seal — leaks are normal), and worn timing gears. The three-speed sliding-gear transmission is robust but requires specialist knowledge to operate (no synchromesh, double-clutching required). The four-wheel mechanical brakes are one of the most safety-critical Model A maintenance items. Failed or poorly-adjusted brakes are the most common cause of Model A accidents. Brake adjustment requires specialist knowledge — the cable-and-rod system must be balanced front-to-rear and side-to-side. Many cars have been converted to hydraulic brakes over the years; from a concours judging perspective, original mechanical brakes are essential to authenticity. Electrical issues are universal: original 6-volt positive-ground systems require specific bulbs and components increasingly difficult to source. Many cars have been converted to 12-volt negative-ground systems for modern reliability — verify the conversion was done properly.

What to Look For

From a concours judging perspective, the Model A inspection is fundamentally about originality and proper documentation. The Model A Restorers Club (MAFCA) maintains the Authentic Specifications volume that documents factory-correct specifications for every body style, year, and option across the production run. Cross-reference any car you're considering against the Authentic Specifications before purchase. Body style verification is critical. The Model A was offered in over thirty body style variants across its production run — Tudor and Fordor sedans, Roadster, Phaeton, Victoria, Cabriolet, Coupe, Sport Coupe, Town Sedan, Town Car, Pickup, Panel Delivery, Mail Truck, and many specialty configurations. Each body style has its own collector trajectory and pricing structure. Verify the body style code on the firewall data plate against the actual body configuration. Engine number verification is essential. The engine number is stamped on the top of the block on the driver's side, just behind the cylinder head. Cross-reference against the original delivery records (where available) and against Ford's production sequence — the engine number range identifies the production date within several months. Replacement engines are common (Model A blocks were widely interchanged during the 1930s and 1940s) and reduce value 10-20% versus matching numbers cars. Wood structure inspection is unique to Model A buying. Most body styles have wood inner framing that supports the steel outer panels. Probe the wood structure at the door pillars, the windshield post, and the rear body corners. Soft, spongy, or rotten wood requires specialist coachbuilding repair — $5,000-$15,000 typical depending on extent. Mechanical condition: the four-cylinder should idle smoothly at 400-500 rpm, run cleanly through the rev range to 2,800 rpm, and produce no smoke at any operating condition. Compression should read 60-75 PSI uniformly across all four cylinders (Model A engines run lower compression than later overhead-valve engines). Test the brake adjustment by stopping the car at 20 mph — pull should be straight without grabbing or fading.

Price Guide

Model A pricing varies dramatically by body style. Closed sedans (Tudor and Fordor) are the most common and most affordable: driver-quality 1929-1931 Tudors run $15,000-$28,000. Fordors: $14,000-$26,000. Open body styles command premium pricing. Phaeton convertibles run $22,000-$42,000 for driver-quality cars. Roadsters: $25,000-$48,000. Sport Coupes: $22,000-$38,000. Cabriolets: $28,000-$55,000. Specialty body styles are the rare end of the market. Town Cars (with chauffeur partition): $45,000-$95,000. Town Sedans: $25,000-$45,000. Victorias: $30,000-$55,000. Pickups and Panel Deliveries are the modest premium segment: $22,000-$45,000 depending on condition and originality. Documented original-paint, low-mileage cars across all body styles command 20-40% premium over equivalent restorations. The unrestored survivor in original livery is consistently preferable to the freshly-restored car of unknown provenance from a concours judging perspective. Project Model As remain extraordinarily affordable: $5,000-$12,000 for running but rough cars across most body styles. Stripped roller candidates: $2,500-$6,000. The strong parts support and active marque community mean Model A restoration costs are dramatically lower than equivalent post-war classic restoration — $15,000-$35,000 for proper driver-quality refresh on a complete car.

Did You Know?

The Model A succeeded the Model T after eighteen years of production. By 1927, the Model T's antiquated planetary transmission, hand-throttle ignition control, and Tin-Lizzie aesthetic had become a serious sales liability against more modern competitors. Henry Ford famously resisted updating the Model T for years — the Model A's development represented a complete redesign of every component, completed in remarkable time once Ford committed to the project. The four-month gap in Ford production between May 1927 (last Model T) and October 1927 (first Model A) was the only break in Ford passenger-car production from 1908 through World War II. Ford retooled the entire River Rouge complex during the gap and emerged with completely new production lines, completely new body stamping equipment, and a completely new car. Industry observers at the time considered the gap an enormous risk — but the Model A launch was the most successful in automotive history at the time, with over 400,000 advance orders before the first car was delivered. The 1928 Model A introduced the iconic "flying quail" radiator cap mascot designed by Ford stylist William Schmidt. The mascot was offered as a factory option through 1931 and is one of the most recognized vintage Ford accessories. Original flying quail mascots in good condition trade for $300-$800 in collector circles; reproductions are widely available but reduce concours value when installed on otherwise-original cars.

How Does It Compare?

Head-to-head matchups for the Ford Model A:

Ford Model A vs Ford Model T Ford Deluxe vs Ford Model A

Browse all comparisons →

Elite Dealer

$39,995

1929 Ford Model A

Contact Seller

Listed by dealer

WeBe Autos

ⓘ

Nationwide consignment dealer

WeBe Autos lists vehicles from sellers across multiple states. The vehicle may not be at the dealer's address shown. Contact the dealer to confirm the vehicle's actual location before traveling.

⚠

Buying safely?

Read our scam-avoidance tips before paying →

Listing Actions

Browse by Era

Pre-War Classics for Sale

All 1929 Classics

Browse all 1929 Cars for Sale

Original Factory Colors

Official paint codes for the Ford Model A (1929).

🎨 View Factory Colors

Model History