NO LONGER AVAILABLE Listing ended Oct 5, 2026

1932 Ford Model B

$66,995

Vehicle Details

Make

Ford

Model

Model B

Year

1932

Mileage

100 miles

VIN

AMS39112

Body Type

Convertible

Transmission

Automatic

Engine

Crate 350 330hp

Description

1932 Brookville body Ford Roadster The 1932 Ford is an iconically beautiful car featured in films, hot-rod magazines and collections. This Brookville Roadster is a beautiful specimen. Built this car approximately 10 years ago.

The 'Brookville' features all metal panels. This car was chopped 2'' and has the removable convertible top. The deep black paint job is mirrored finished and compliments the burgundy leather interior. Powered by a crate 350 rated at 330 Horsepower, which is coupled to a 700R4 automatic transmission.

Fully equipped with a GM tilt wheel, front disc brakes, a dropped and polished front axle, Ford 9' rear end, dual aluminum exhaust with Flowmaster mufflers, Powder Coated frame, Dayton wire wheels, Banjo Steering, Leather seats, Stainless steel brake lines, etc. 350 700R4 transmission Dayton Wheels Leather seats Lift off convertible top Lokar shifter Tilt column 2' chop Banjo steering wheel Front disc Polished drop axle 9' rear end Dual flowmaster

Ford Model B Buyer's Guide (1932–1934)

Full guide

Jim Vasquez

Hot Rods

1932–1934

~4 min read

Updated Apr 2026

The Ford Model B is the last four-cylinder Ford before the flathead V8 took over, and the body it shares with the Model 18 is the most iconic hot rod platform in American history. Whether you want an original prewar survivor or the foundation for a traditional build, understanding what you're actually looking at before you buy is the whole game.

This guide covers

✓ 10-point inspection checklist

✓ Common issues & what to avoid

✓ In-person inspection guide

✓ Market pricing by year & condition

✓ 5 FAQs answered

✓ History & fun facts

Read the Full Model B Buyer's Guide

Ford Model B Market Overview

Based on 35 Ford Model B listings currently on ClassicCarsArena.com

Listed Now

$52,957

Avg. Asking Price

1932–1933

Year Range

Price Position on Our Site - Above Average

This car: $66,995

Low: $10,895 High: $95,000

Transmission Distribution

Automatic 77% ◄

Manual 11%

Condition Distribution

Excellent 29%

Good 14%

Fair 6%

Poor 3%

Data from ClassicCarsArena.com listings Browse all 35 listings →

🔑

Selling a classic? Here's how

Fees, audience and photo limits compared: compare the places to sell classic cars .

List Yours →

Ford Model B Buyer's Guide (1932–1934)

People get confused about the "Deuce" and what the Model B actually is, so let me clear it up. In 1932 Ford offered two mechanically different cars in the same body: the Model B with the carry-over four-cylinder, and the Model 18 with the brand new flathead V8. Both are "1932 Fords." The Deuce legend is built on that body, those sweeping fenders, that low roofline, those proportions that work in every body style from three-window coupe to roadster. If you want an original Model B to preserve as a prewar survivor, that's one car. If you want the Deuce body as a hot rod foundation, that's another conversation entirely. Know which one you're buying before you fall in love with the stance.

What to Check Before Buying

✓

Steel vs. fiberglass verification , Use magnet on flat panels, steel attracts, fiberglass does not

✓

Cowl probe , Probe cowl channel at windshield base for rust penetration

✓

Firewall and floor pans , Inspect firewall and floor pans for rust-through or repairs

✓

Lower rear quarters , Check rear quarter-to-fender seams for corrosion

✓

Door gap evenness , All four door gaps should be even, uneven gaps indicate body damage or twist

✓

Frame X-member inspection , Look for weld repairs or cracks at X-member and front crossmember

✓

Hot rod fab quality , Inspect all custom fabrication, motor mounts, suspension mods, brake work

✓

Chop/channel quality , Assess any body modification for workmanship and filler usage

✓

Flathead cooling , Verify radiator is sized correctly for V8, flatheads run hot with undersized cooling

✓

Trunk floor , Check trunk floor for water damage from deteriorated lid seal

Common Issues

Cowl rust is universal on unrestored examples. Floor pan deterioration from water trapped under original rubber mats. Lower rear quarter rust at the fender-to-body seam. Trunk floor rust from deteriorated lid seals. On V8-swapped cars, verify the engine mount fabrication quality and cooling system adequacy, flathead V8s run warm and require correct radiator sizing. Frame cracks at the X-member junction occur on hard-driven cars. Fiberglass bodies misrepresented as steel is a documented problem in the market, always verify with a magnet. On heavily modified cars, incorrect front-end geometry can cause handling problems; have any custom-built front suspension inspected before purchase.

What to Look For

Verify steel body vs. fiberglass reproduction, use a magnet on flat panels and tap for hollow sound. Cowl rust at the windshield base is the primary structural failure zone, probe thoroughly. Firewall condition and floor pans. Lower rear quarters at fender seams. Door gap evenness, uneven gaps indicate twisted or repaired body. Frame integrity on any car: look for weld repairs at X-member and front crossmember junctions. On hot rod builds, assess all fabrication quality, frame welds, body work quality on any chop or channel, brake and steering modifications. Verify whether the body is an original steel survivor or has been previously damaged and repaired.

Price Guide

Original steel body alone (restorable): $15,000–$35,000 depending on body style. Original complete car, driver condition: $30,000–$50,000 (Tudor/Fordor); three-window or roadster driver: $50,000–$75,000. Show-quality original three-window: $80,000–$120,000+. Quality hot rod build on steel body with flathead: $40,000–$80,000. Award-winning documented traditional build: $100,000+. Fiberglass-body hot rod builds price significantly lower, $15,000–$40,000 depending on build quality.

Did You Know?

The 1932 Ford body was designed in fewer than 90 days under Henry Ford's direct supervision, reportedly with Henry rejecting multiple proposals before approving the final design. The flathead V8 that debuted in the Model 18 was the first V8 available in a mass-produced American car priced for average buyers, it sold for $460. John Milner's yellow 1932 Deuce coupe in American Graffiti (1973) is widely cited as the most influential single car in hot rod popular culture. The original car still exists.

$66,995