NO LONGER AVAILABLE Listing ended Nov 2, 2026

Elite Dealer

1934 Ford Victoria

Hobart, Indiana

$64,500

Vehicle Details

Make

Ford

Model

Victoria

Year

1934

VIN

KMR5930CV

Body Type

Other

Transmission

Manual

Engine

8.0

Description

1934 FORD Victoria Crate Gen. II 600 HP Viper engine, chopped 34 Vicky Body by Downs, steel hood and sides by Hoosier hoods, TCI frame stretched 5' to accommodate the V-10, provides an exceptional ride with the stretched wheelbase. Tremec 6 speed trans, Heidt's polished front independent front & rear suspension, chrome half shafts, in board brakes, Currie polished center section with 3:73 ratio.

New Wilwood 4 WPDB, polished calipers, Aldan coilovers and chrome springs making for a great ride. Vintage AC, All shock and suspension bushings replaced, gas door release handle reposition and secured. Griffin aluminum radiator, Tank's stainless 16 gal. gas tank, Aeromotive in tank fuel pump & fuel system with teflon lined steel braided fuel lines, vapor cannister, custom made ceramic coated headers, header's wrapped with DEI, polished stainless exhaust, Stainless Specialties tube mufflers, Juliano's pro clamps, one off custom quad stainless exhaust tips.

Custom made front frame end covers, stainless rear frame end extension covers and rear bumper. One off engine cover, fabulous red and black HOK paint a by the late Mike LaValle, can be seen at KILLERPAINT.COM. Mike's signature graphics and real fire flames and flamed skull hood ornament, powder coated ET Fueler wheels, B.F.

Goodrich Tires, 185x65x15 front, 345x55x16 on rear. Front end and cross member reinforced with steel gussets. 37 Ford Rodworx led tail lights. billet license plate frame, Hagen mirrors, SoCal headlights, with turn signals, Hagen hood latch system, opens from either side or off completely. Red and black vinyl interior, custom door panels, split back seat by Tea's with center arm rest, black wool carpet, Thunderbird rear seat, 40 Ford steering wheel with custom paint and airbrushed skull by Mike.

Ididit polished tilt steering column, suicide door locks, Vintage heat and air, power doors, power windows, hidden Lokar door release cable, remote battery kill switch, interior fuel pump shut off, external battery terminals. Power Acoustik AM/FM, CD player, Bluetooth compatibable, with remote, new interior lighting, front and rear, with kill switch to leave door open at shows, Odyssey Extreme battery, on board battery maintainer with flush mounted plug, suspended pedals. Clayton billet door handles, billet AC vents, white face Auto Meter gauges in billet dash panel, Dakota Digital GPS speedometer.

This is an awesome one of a kind ride with a killer stance and looks, featured in Street Rodder Magazine. An amazing one of a kind ride. Titled as a 1934 Ford. Body Style: Custom
Doors: 2

Classic Ford Coupe Buyer's Guide

Full guide

Jim Vasquez

Hot Rods

1932–1948

~5 min read

Updated Apr 2026

Definitive buyer's guide for classic Ford Coupe 1932-1948. Pre-war and post-war coupe variants, hot rod platform fundamentals, frame and body inspection, current pricing.

This guide covers

✓ 10-point inspection checklist

✓ Common issues & what to avoid

✓ In-person inspection guide

✓ Market pricing by year & condition

✓ 5 FAQs answered

✓ History & fun facts

Read the Full Victoria Buyer's Guide

Ford Victoria Market Overview

Based on 13 Ford Victoria listings currently on ClassicCarsArena.com

Listed Now

$40,618

Avg. Asking Price

1931–1956

Year Range

Price Position on Our Site - Above Average

This car: $64,500

Low: $15,495 High: $77,995

Transmission Distribution

Automatic 54%

Manual 31% ◄

Condition Distribution

Excellent 15%

Good 15%

Fair 8%

Data from ClassicCarsArena.com listings Browse all 13 listings →

🔑

Selling a classic? Here's how

Fees, audience and photo limits compared: the best sites to sell a classic car .

List Yours →

Classic Ford Coupe Buyer's Guide

The Ford Coupe, particularly the iconic 1932-1934 cars and the post-war 1946-1948 cars, represents the foundational platform of American hot rodding. The 1932 Ford with its flathead V8 launched a tradition that defined American performance culture for the next ninety years, and the 1933-1934 cars refined the formula. Period-correct flathead V8 power, chopped tops, channeled bodies, and traditional kustom kulture aesthetics define the genre. Whether you're hunting an original-condition Deuce coupe for restoration or a chopped-and-channeled period-correct hot rod from a recognized builder, the Ford coupe market is one of the most active and most actively-judged segments in the entire American collector hobby. The Goodguys circuit, the Grand National Roadster Show, and SEMA Battle of the Builders all maintain build-quality standards that separate the legitimate traditional builds from the hobby work.

What to Check Before Buying

✓

Verify body style code on firewall dataplate , Three-window vs Five-window vs Standard Coupe distinction is critical. Different collector trajectories.

✓

Inspect frame at body mount points , Pre-war frames rust at body mount cross-members. Probe with screwdriver from underneath.

✓

Probe wood inner body framing on pre-1939 cars , Pre-1939 Ford bodies have wood inner framing. Wood rot = $5,000-$15,000 specialist coachbuilding repair.

✓

Examine running boards and fender attachment , Running boards rust where they meet body. Fender attachment points are universal rust zones.

✓

Check rumble seat (if applicable) for rust , Rumble seat coupes have additional rust concerns at rear deck. Lift rumble seat for inspection.

✓

Verify flathead V8 vs OHV V8 if applicable , Original 1932-1953 Ford coupes used flathead V8. Hot rods often have post-1954 OHV V8 swaps.

✓

For Deuce coupes (1932), demand specialist authentication , Original 1932 Ford coupes are blue-chip hot rod platform. Replicas and replicars exist.

✓

Inspect cowl seam at windshield base , Where windshield meets firewall. Water damage rots wood structure on pre-1939 cars.

✓

Check mechanical brake adjustment (pre-1939 cars) , Mechanical brakes on pre-1939 Fords require specialist adjustment. Convert-to-hydraulic common.

✓

For hot rod builds, verify build documentation , Recognized builder pedigree adds significant value vs hobby builds. Verify build documentation.

Common Issues

Ford coupe rust patterns vary by era. Pre-1939 cars (with wood inner body framing) face wood rot in addition to steel rust, water penetrating through failed weatherseals causes wood to rot from inside, compromising body structure. Common rust zones: lower body panels, running boards, fender attachment points, the rear cargo floor (if applicable), and the cowl seam where the windshield base meets the firewall. Post-1939 all-steel cars rust at the same locations but without wood structure concerns. Mechanically, the Ford flathead V8 (1932-1953) is among the most over-engineered engines of the pre-war era, bulletproof when serviced correctly. Common issues include burnt valves on cars run with poor ignition timing, worn camshaft lobes, oil leaks at the rear main seal, and worn timing gears. Many 1932-1948 Ford coupes have been converted from flathead to post-1954 OHV V8 power (Chevy small-block, Ford Y-block, etc.) for modern performance, verify the conversion was done properly with appropriate motor mounts and engine compartment fitment. The three-speed sliding-gear transmission (1932-1939) is robust but requires specialist knowledge to operate (no synchromesh on first gear, double-clutching required). The three-speed synchromesh transmission (1940-1948) is dramatically more pleasant for daily driving. Many traditional hot rod builds use post-war Ford or aftermarket transmissions for improved drivability. The mechanical brakes (1932-1938) are one of the most safety-critical Ford coupe maintenance items. Failed or poorly-adjusted mechanical brakes are the most common cause of pre-1939 Ford accidents. Brake adjustment requires specialist knowledge, many cars have been converted to hydraulic brakes (1939+ Ford hydraulic system or aftermarket disc brakes). From a concours judging perspective, original mechanical brakes are essential to authenticity on pre-1939 cars; from a daily-driver standpoint, hydraulic conversion is widely accepted. Electrical issues are universal: original 6-volt positive-ground systems on pre-1956 Fords require specific bulbs and components. Many cars have been converted to 12-volt negative-ground systems for modern reliability, verify the conversion was done properly.

What to Look For

Body style verification is the first stop. Three-Window Coupe vs Five-Window Coupe vs Standard Coupe distinctions drive significant value differences. Three-Window Coupes command 25-50% premium over equivalent Five-Window Coupes. Verify the body style code on the firewall dataplate and visual inspection of the side window count. For 1932 Deuce coupe claims, demand specialist authentication. Multiple companies have produced reproduction 1932-style fiberglass and steel bodies over the decades. Original 1932 Ford steel bodies have specific construction details, original Ford date stampings on body components, and chassis number locations that distinguish them from reproductions. Specialist authentication ($300-$800 typical) is mandatory for any Deuce coupe priced over $80,000. Wood structure inspection is critical for pre-1939 cars. Probe the wood inner body framing at the door pillars, windshield post, and rear body corners. Soft, spongy, or rotten wood requires specialist coachbuilding repair. From a concours judging perspective, original-condition wood structure is essential to authenticity; replacement wood reduces concours value. For hot rod builds, verify build documentation and builder pedigree. Period-correct traditional builds from recognized hot rod shops (Roadster Shop, So-Cal Speed Shop, Brizio Street Rods, Pete & Jakes, others) command significant premium over equivalent hobby work. Goodguys Trophy winners, GNRS America's Most Beautiful Roadster pedigree, and SEMA Battle of the Builders awards add documented value. For period-correct traditional hot rod builds, verify the engine and drivetrain specification. Period-correct flathead V8 power (with components like Stromberg 97 carburetors, Edelbrock cylinder heads, finned aluminum intake manifolds, and Mallory ignition) commands premium over modern V8 swaps for traditional-aesthetic cars. Modern resto-mod builds (LS swap, modern brakes, modern air ride suspension) appeal to a different market segment. Document the car. Photograph every panel, every chassis number stamping, every body construction detail (especially on Deuce coupes), every engine bay component, and every identifying tag. Build a comprehensive case file before purchase.

Price Guide

1932 Ford Three-Window Coupe: driver-quality original-condition cars run $80,000-$140,000+. Documented original-paint, low-mileage cars: $140,000-$220,000+. The 1932 Three-Window is the most desirable single Ford coupe ever produced. 1932 Ford Five-Window Coupe: driver-quality original-condition cars run $55,000-$95,000. Documented original cars: $95,000-$160,000. 1932 Ford Standard Coupe: driver-quality cars run $42,000-$75,000. The base Standard Coupe lacks the De Luxe trim of the desirable Three-Window and Five-Window variants. 1933-1934 Ford Coupes: driver-quality cars run $50,000-$95,000. The 1934 model year is the most refined of the era. Documented original cars: $80,000-$140,000+. 1935-1939 Ford Coupes: driver-quality cars run $32,000-$65,000. The 1939 model year is the most desirable of this era (last "early" Ford before 1940 redesign). Documented original cars: $50,000-$95,000. 1940-1948 Ford Coupes: driver-quality cars run $22,000-$48,000. Post-war 1946-1948 cars are slightly more affordable than pre-war 1940-1941 cars. Documented original cars: $35,000-$70,000. Traditional period-correct hot rod builds: prices vary dramatically by builder pedigree. Hobby-built traditional flathead-powered Deuce coupes: $55,000-$120,000. Recognized-builder traditional builds (Roadster Shop, So-Cal, Brizio): $150,000-$350,000+. GNRS America's Most Beautiful Roadster pedigree builds: $300,000-$1M+. Modern resto-mod builds (LS swap, modern brakes, air ride): $80,000-$220,000 typical, with high-end builds reaching $400,000+ for show-quality work. Project Ford coupes start around $20,000-$45,000 across most pre-war years. Stripped roller candidates: $10,000-$25,000.

Did You Know?

The 1932 Ford "Deuce" coupe became the foundational platform of American hot rodding due to three coincident factors: Ford produced enormous quantities (over 270,000 1932 Fords across all body styles), the Ford flathead V8 made hot-rodding economically accessible to ordinary buyers, and post-WWII returning veterans had cash to spend and mechanical skills from military service. The Three-Window Coupe in particular became the most photographed hot rod platform in American history, featured on hundreds of magazine covers from Hot Rod magazine's 1948 launch through modern automotive media. The "Deuce" nickname for the 1932 Ford derives from the 1930s American slang for "two", referring to the year 1932. The nickname became formalized in hot rod culture during the 1940s-1950s and remains in active use today. Other classic Ford-coupe-era nicknames include "Tudor" (two-door sedan, derived from "two-door"), "Fordor" (four-door sedan), and "Deluxe" (the high-trim 1932-1948 Ford trim level). The Ford flathead V8 powered American performance through the late 1940s and early 1950s, until Chevrolet's introduction of the small-block V8 in 1955 began to displace the flathead in hot rod culture. Period-correct traditional hot rod aesthetic (still actively maintained at events like the Hot Rod Reunion, Goodguys, and GNRS) requires flathead V8 power for authenticity. The flathead remains in active use in traditional hot rod culture and represents one of the most actively-collected pre-war American engine platforms.

Elite Dealer

$64,500