1970 Dodge Challenger for Sale

5 listings

1970 was the first year of the Challenger, Dodge's answer to the Mustang and Camaro. It shares the E-body platform with the Plymouth Barracuda but rides on a 110-inch wheelbase, two inches longer. Buyers could order almost anything, from a slant six to the 426 Hemi, in a hardtop or a convertible, plus the luxury SE, the R/T performance model and the one-year-only T/A. That range is what makes a 1970 so desirable and so often cloned.

Asking prices
$43,970 – $210,995
Median asking price
$109,970
Median past asking price
$68,949 (16 listings that ended in the 12 months to Nov 2026)
In our price archive
135 past listings
Clear Filters
5 listings found

Models and how many were built

Published totals for 1970 differ, from about 77,000 to about 83,000 Challengers depending on the source, so be wary of exact figures quoted in ads.

  • Challenger: the base car, as a hardtop or a convertible.
  • SE (Special Edition): a hardtop with a vinyl roof and a smaller, formal rear window. It could be combined with the R/T.
  • R/T (Road/Track): the performance model, with a 383 as standard and the 440 or 426 Hemi optional. Offered as a hardtop and, in 1970 only, as a convertible.
  • T/A: built for one year to qualify the car for Trans-Am racing. 2,399 were made, all with the 340 Six Pack, a fiberglass hood and side-exit exhaust.

Only a few hundred 1970 Challengers were built with the 426 Hemi.

Engines and transmissions

The range started with the 225 slant six (145 hp) and the 318 V8 (230 hp), then the 340 (275 hp) and the 383 at 290, 330 or 335 hp. Above those sat the 440 Magnum at 375 hp, the 440 Six Pack at 390 hp and the 426 Hemi at 425 hp. The T/A used a 340 with three two-barrel carburetors, rated at 290 hp.

Transmissions were a three-speed manual, a four-speed with the Hurst pistol-grip shifter, and the TorqueFlite automatic.

Is it a real R/T, T/A or Hemi car?

Chrysler VINs carry more than GM VINs of the same year, which helps. The VIN is on the dash, visible through the windshield. On a 1970 Challenger it starts with J; the second letter is S on an R/T and H on the base cars. The next two digits give the body: 23 for a hardtop, 27 for a convertible, 29 for the SE hardtop.

The fifth character is the engine: C for the 225, G for the 318, H for the 340, L and N for the 383s, U for the 440, V for the 440 Six Pack, J for the T/A 340 Six Pack and R for the 426 Hemi. A real T/A VIN starts JH23J. Then check the fender tag under the hood and, if it survives, the broadcast sheet, often found under the rear seat or carpet. Tags and VIN plates have been faked, so on an expensive car pay for an inspection by a Mopar documentation specialist.

What to inspect before you buy

  • Rust: rear quarters and the seam to the rocker, the trunk floor and its extensions, the rear window channel (worst under a vinyl roof), floor pans, door bottoms and the cowl.
  • Structure: front frame rails, the torsion bar crossmember and the rear leaf spring mounts. Convertibles need the closest look, since they rely more on the floor structure.
  • Big-block cars: sagging front suspension, and replica Six Pack carburetor setups presented as original.
  • Paperwork: fender tag, broadcast sheet and a title that matches the VIN.

Related listings

In-Depth Answers

Editorial Q&A · 2 articles
Free Valuation Tool
What's a Dodge Challenger worth today?
Get a market-data estimate based on past and current asking prices.
Get Estimate

Recently Ended Dodge Challenger Listings

See all 305 past listings →
Vehicle Last Asking Price
1970 Dodge Challenger $54,997
1972 Dodge Challenger $14,995
1985 Dodge Challenger $20,995
1970 Dodge Challenger $30,995
1973 Dodge Challenger $34,995
1973 Dodge Challenger $43,995

Head-to-Head Comparisons

Frequently Asked Questions about the 1970 Dodge Challenger

Six-cylinder and small-block cars and projects start around $30,000. Solid 340 and 383 cars and good R/T-style builds commonly ask $60,000 to $130,000. Documented big-block R/Ts, T/As and convertibles ask more, and Hemi cars are priced in a different league. Where this page shows a price range and median, they are calculated from the cars listed today.
Start with the VIN on the dash. A 1970 Challenger R/T VIN begins JS; other Challengers begin JH. The fifth character gives the original engine, for example N for the 383 four-barrel, U for the 440, V for the 440 Six Pack and R for the 426 Hemi. Then compare the fender tag and the broadcast sheet with the car.
A one-year model built so Dodge could race the Challenger in the SCCA Trans-Am series. Dodge made 2,399, each with a 340 engine with three two-barrel carburetors, a fiberglass hood with a large scoop, side-exit exhaust and different tire sizes front and rear. A real T/A VIN starts JH23J.
They share the Chrysler E-body platform and most mechanical parts, but no major body panels. The Challenger has a 110-inch wheelbase, two inches longer than the Barracuda, and was positioned as the slightly larger, more upscale car.
Far more than any other 1970 Challenger, because only a few hundred were built. The fifth character of the VIN, an R on a Hemi car, gives a first check; the fender tag, the broadcast sheet and the car's documentation confirm it.

Car alert

Get an email when a 1970 Dodge Challenger is listed

At most one email a day. Stop anytime with one click.

Have a Dodge Challenger for Sale?
Reach thousands of serious classic car collectors across the US.
Sell It Here →
Selling a classic? Here's how: sell my classic car
Are You a Classic Car Dealer?
List your full inventory and connect with targeted classic car buyers.
Join as a Dealer →

Articles About the Dodge Challenger